Taunton's Threads - For people who love to sew
Sign up for our eLetter for monthly tips and advice right from the editors
 |
|
|
From the pages of Threads Magazine Bag Your Jacket Lining This ready-to-wear method of inserting a lining gives the fastest and most professional-looking results
All jackets benefit from having a lining; it lets the jacket slide easily over other clothes, drape correctly on the body, and stand up to wear and tear. Any jacket pattern, whether it includes a lining or not, can be used to make a bagged lining. If you're using a pattern without a lining, it's easy to make a lining pattern. Keep in mind that the bagging process won't work without a back neck facing, which is also a cinch to make a pattern for, as shown in the same drawings. And if you're one of those people who always needs to shorten or lengthen a jacket's sleeves or body, alter your pattern before cutting it out, because it's easier to work with a pattern that has the correct hem and sleeve lengths. The bagging procedure begins only after the jacket and lining have been constructed, but there are a few details to attend to before construction. The first step is to serge-finish the seam allowances of both the jacket and lining hems, side seams, sleeve hems, underarm seams, and the jacket's front facings. Aligning raw edges is much easier to do when they're serge-finished, and results in more accurate stitching lines. You won't see these seam allowances after the jacket is lined, but you'll know they're not raveling during wear (which many fabrics tend to do). I don't serge the neck edges or armscyes, as they're mostly cut on the bias and don't ravel. Since the jacket's seam allowances will be pressed open, don't serge any two seam allowances together, as you might be tempted to do, for example, on the center-back seam. If you don't have a serger, don't zigzag the edges, as this stitch tends to make the fabric fray more rather than less. Instead, cut cleanly and sew as accurately as possible. Now, construct the jacket, including setting in the sleeves and collar, following the pattern instructions up to hemming and inserting the lining. Attach the sleeve heads and shoulder pads, too. And check to see that the hem of the jacket is even and the sleeve lengths are correct. The next step is to create a temporary hem on the jacket. Hand-baste both the entire jacket hem and the sleeve hems 1/4 in. up from the hem's fold and lightly steam-press the folds. This step will save you time and hassle when sewing the hem in place later on. And, as you'll see, the hem crease will serve as a stitching guide.
Complete the lining, including setting in the sleeves. Lining seams can be serged together in a single pass on the machine, except for one side seam that needs to have an opening through which you'll turn the jacket right side out later. If your jacket pattern has an underarm side panel, make the opening in the seam that connects the panel to the back. This designated seam needs to be sewn conventionally, so that the seam allowances can be pressed open. The creases of these seam allowances will serve to guide the little bit of hand-sewing at the end of the project. After sewing and pressing all the lining seams, sew the jacket facing to the lining, as per the pattern's instructions, but leave unsewn the bottom 3 in. of the facing hems.
At this point you'll have an assembled lining and a complete jacket shell, which are ready to be joined completely by machine. But first, at each end of the jacket hem, pull out the basting stitches for the depth of the facings, so you can sew the lining's facing to the jacket's front. Now, take the time for this next important step: Compare the width of the lining at the hem to the width of the jacket. If they don't match exactly at the side seams and front edges, even them up by either letting out the lining if the lining is too small or taking it in if it's too large. This precaution eliminates the need to ease a lining that's too big (which causes the lining to ripple) or the opposite problem, to stretch a lining that's too small to fit the jacket (which causes the jacket hem to pucker). Repeat this step for the sleeves. If your lining and jacket widths are unequal, make sure to cut out the pattern for your next jacket accurately, and sew exactly on the stitching lines. The day I learned these lessons, the quality of my finished garment improved tremendously. Join lining to jacket Ready to sew nonstop? Rev up your machine, and sew the lining to the jacket front and neck edges in one continuous seam. Next, sew the jacket and lining bottom edges together. Here's the payoff for premeasuring the lining and jacket widths--sewing the hem is a breeze. Keeping right sides together, flip the jacket's basted hem open, but don't remove any basting stitches along the hem. Align the serged edge of the jacket's hem to the lining's serged hem, matching all of the lining's side seams to the jacket's corresponding side seams. Pin the entire hemline, and then stitch the two together just inside the serged stitching. Take care not to stretch the pinned fabrics. That's it! Now turn the jacket and sew the hem in place.
The last major step is to sew the sleeve lining hems to the jacket's sleeve hems. You'll be grateful here that you made the lining widths match those of the jacket. Shove the sleeve lining down the jacket's sleeve and unfold the hem down and out of the sleeve, then follow the steps shown in the photos above. As was done on the jacket hem, use a running stitch to securely tack the hem of the jacket's sleeve, remove the basting stitches, and repeat the procedure for the other sleeve. All that remains is to hand-stitch the lining's side-seam opening closed. With a single thread that matches the lining color, hand-sew with a ladder stitch back and forth between the pressed seamline creases. The seam will be invisible and look like a regular machine-sewn seam. Now sashay out the door in your newly lined jacket, knowing that you'd still be sewing it had you not used the bagging method. Might as well head to the fabric store for material to make the next one.
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
