Q: I’m building a picket fence and want to swoop the tops of the pickets. I’d like to make a pattern so that I can trace the swoop on the pickets and cut them in place with a jigsaw, but I’m not sure how to calculate the radius of the curve. The fence posts are about 5 ft. apart, and I want the pickets at the posts to be 3 in. taller than the pickets in the middle. What’s the easiest way to accomplish this?
Thomas Grady, via email
A:
Assistant editor Daniel S. Morrison replies: The simplest way to create the swoop for your fence is to use a semirigid rod (1-in. PVC pipe works well, but a 1x3 would work, too) to scribe one section; then either make a template based on that section, or continue to use the rod for each section of fence. Make the rod about 1 ft. longer than the planned length of the curve. Drive a nail or screw at each end of the arc to rest the rod on. Tie a piece of string to the center of the rod, pull it down 3 in., then pencil the cutline on the pickets along the arc.
Related Articles
In the Golden Gate's shadowBy creating more than just an entryway, craftsman Julian Hodges transcends the idea of conventional gate constructionby Julian Hodges
Video: Great Gates for Any HouseA California gate builder and artist demonstrates the intricacies of crafting a quatrefoil
by Julian Hodges A Gate That's Built to Last
Weather-resistant construction means this driveway gate will stand up to Rocky Mountain storms for years to comeby Andy Beasley
Building a Picket FenceA carpenter uses shop-built sections and sturdy foundations for a traditional structureby George Nash
